My Cart:

0 item(s)
You have no items in your shopping cart.


Welcome to our online store!

DIA-COMPE TSALI Front Hub 32 Hole Disc Brake Vintage Mountain Bike 90's

Availability: In stock


Quick Overview

Estimate Shipping Cost

Enter your destination to get a shipping estimate


DIA-COMPE TSALI DISC 32 hole. Sealed bearings. New old stock. Approx 108mm wide.

The front (15mm oversized) axle is constructed of a metal matrix material that has a "high specific stiffness". This means that the Tsali axle will be up to 68% stiffer than our competitors typical aluminum axle.

The Tsali SpeedCheck hub uses an 18mm hub cap for more positive interface with suspension fork drop outs, yielding a more laterally rigid front end.

The center line of the hub flange is located directly over the bearing center line. Radial loads are transmitted through the bearing with no added bending or twisting forces applied to the bearing. This allows smoother running and extended life for the bearings.

The hub flanges are angled inward at a 5 degree to equalize the bending loads of the spokes. The spokes straight path to the rim, provides a longer spoke life at a higher tension.

The special threaded hub cap is designed so that you can adjust the bearing load from one side of the hub, and so that it is simple to service.

The Tsali SpeedCheck hubs use a technically designed flange in which the rotor mounts onto. This fixed type of rotor will eliminate any drag from the pads.


Condition New